Wireless copy remote control manual

I. Overview*

The wireless copy remote control is a new type of self-learning remote control, which can transfer another encoding method to the remote control

It is easily copied to this remote control to have the same functions of the copied remote control. There are many kinds of copy remote controllers, there are many coding chips that can be copied, and the frequency can also be customized. It is a "master key" in the radio frequency remote control series.

Second, technical parameters*

Working voltage DC12V

Working current 10MA

Frequency 315/433 MHZ (other frequencies can be customized)

Applicable codes 2262, 2260, 1527, 2240, 3526, 5026, 527, 918, 6010, 6014, etc.

Environment temperature —20℃~+50℃

3. Operation method*

1, *clear code*

Press and hold the lock button and unlock button at the same time. After 2 seconds, the LED indicator flashes three times, and then flashes continuously. Indicates that the code stored in the remote control has been cleared.

2. *Copy (learn)*

Hold the copied remote control in one hand and the copy remote control in the other hand. Keep the two remote controls as close as possible and press the buttons of the two remote controls at the same time. After 3 seconds, the LED indicator flashes three times, and then flashes continuously. This indicates that the key of the copy remote control is the same as the key of the copied remote control. The other keys are also learned by the above method.

3. *Restore encoding*

If the copied remote control code is erased by mistake, don't worry, the remote control can be restored by itself. The method is to press the upper and lower buttons at the same time, (the metal shell remote control is on the left, the plastic shell remote control is on the right) 3 seconds later, the LED indicator flashes three times, and then flashes continuously. This indicates that the original code of the remote control has been restored.

Four, *Notes*

1. The frequency of the copied remote control and the copied remote control may be different, but the transmitted frequency of the remote control after successful copying is inherent in itself.

2. The keys of the copy remote control and the copied remote control can be arbitrary, as long as both are operated at the same time, the functions of the two are the same after success.

3. Before using this copy remote control to copy, please be sure to clear the existing code of this remote control. The following is a method to test whether the existing codes of the copied remote control are successfully cleared:

After you clear the code, you can press any key on the remote control. If the LED does not flash immediately at this time, it will flash after 2S, which means that the cWireless copy remote control manual

I. Overview

The wireless copy remote control is a new type of self-learning remote control, which can transfer another encoding method to the remote control

It is easily copied to this remote control to have the same functions of the copied remote control. There are many kinds of copy remote controllers, there are many coding chips that can be copied, and the frequency can also be customized. It is a "master key" in the radio frequency remote control series.

Second, technical parameters

Working voltage DC12V

Working current 10MA

Frequency 315/433 MHZ (other frequencies can be customized)

Applicable codes 2262, 2260, 1527, 2240, 3526, 5026, 527, 918, 6010, 6014, etc.

Environment temperature —20℃~+50℃

Three, operation method

1. Clear code

Press and hold the lock button and unlock button at the same time. After 2 seconds, the LED indicator flashes three times, and then flashes continuously. Indicates that the code stored in the remote control has been cleared.

2. Copy (learn)

Hold the copied remote control in one hand and the copy remote control in the other hand. Keep the two remote controls as close as possible and press the buttons of the two remote controls at the same time. After 3 seconds, the LED indicator flashes three times, and then flashes continuously. This indicates that the key of the copy remote control is the same as the key of the copied remote control. The other keys are also learned by the above method.

3. Recovery code

If the copied remote control code is erased by mistake, don't worry, the remote control can be restored by itself. The method is to press the upper and lower buttons at the same time, (the metal shell remote control is on the left, the plastic shell remote control is on the right) 3 seconds later, the LED indicator flashes three times, and then flashes continuously. This indicates that the original code of the remote control has been restored.

Four, matters needing attention

1. The frequency of the copied remote control and the copied remote control may be different, but the transmitted frequency of the remote control after successful copying is inherent in itself.

2. The keys of the copy remote control and the copied remote control can be arbitrary, as long as both are operated at the same time, the functions of the two are the same after success.

3. Before using this copy remote control to copy, please be sure to clear the existing code of this remote control. The following is a method to test whether the existing codes of the copied remote control are successfully cleared:

After you clear the code, you can press any key on the remote control. If the LED does not flash immediately at this time, it will flash after 2S, which means that the copied code has been completely cleared. If the LED still flashes quickly and immediately, That means that the encoding of copy still exists.

4. Copying the remote control can copy fixed codes, EV1527, PT2240, but cannot copy rolling codes, such as HCS301